Hd Radio Operations - Clarion CZ301 Owner's Manual & Installation Manual

Satellite Radio Mode
LOCK
Refer to System Setup page 11.
UNLOCK
Refer to System Setup page 11.

HD Radio Operations

About HD Radio™ Technology
HD Radio Technology allows CD-quality
digital broadcasting of your local AM and
FM radio stations. HD Radio broadcasts
can include multiple channels on the same
frequency, which is called multicasting. With
multicasting, you can receive up to eight
additional multicast channels: HD1~HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers HD Radio Technology.
NOTE: Not all FM or AM stations offer
HD Radio (digital) broadcasting. You can
receive both analog and digital stations
with the unit.
Accessing radio mode
Press the [SRC / ] button on the front
panel or remote control to switch to the HD
RADIO source, and HD icon will illuminate.
Select a band
Press the [BAND] button to change between
three FM and one AM bands. Each band
stores up to six preset stations.
Tuning
- Seek Tuning
Press and hold the [
seek the next/previous station automatically.
- Manual Tuning
Press the [
] or [
the radio frequency number up or down one
step.
] button to
] or [
] button to move
UNSKIP
Refer to System Setup page 11.
HD Radio multicast channels
To tune to an HD Radio multicast channel,
tune to the main signal and then press the
[MENU] button on the panel. PTY and SUB
CH are displayed. Select PTY or SUB CH by
rotate [VOLUME] knob and push to confirm.
• Select PTY type from the category list by
rotate [VOLUME] knob and push.
• Select SUB CH by rotate [VOLUME] knob
and push.
• Multi channel is available when a digital
signal is detected, the DIGITAL icon will
illuminate. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Preset stations
Up to six stations on each band can be
stored as presets, which can then be
instantly recalled by pressing the associated
preset button. To store a station, turn the
radio on and select the desired band and
station. Press and hold the desired preset
button (numbered one through six on the
face of the radio or remote control) for more
than 1 seconds. When stored, the preset
number will appear in the display. The
station is now stored and can be recalled by
pressing the corresponding preset button.
Repeat for the remaining five presets on the
current band and for presets on the other
four bands.
NOTE: Multicast stations can be stored as
presets, but the unit must be in Digital or
Auto reception mode to receive them.
15