Connecting The Accessories - Clarion CZ101 Owner's Manual & Installation Manual

Front Right
Front Left
Rear Right
Rear Left
4-Speaker system
or
2-Speaker system
Front Right
Front Left
Not used.
Insulate each wire

8) Connecting the Accessories

• Connecting to the external amplifier
External amplifiers can be connected to the 2 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
16-Pin Connector Extension Lead
(attached to the source unit)
Gray
Brown wire (Phone mute lead)
Gray/Black
White
White/Black
Yellow wire (Memory back-up lead)
Purple
Purple/Black
Green
Red wire (Power lead)
Green/Black
Blue/White wire (Amplifier turn-on lead)
Black wire (Ground lead)
Gray
Gray/Black
Orange/White wire (Illumination lead)
White
White/Black
Purple
Blue wire (Auto antenna lead)
Purple/Black
Green
Green/Black
Connect to cellular phone mute lead.
Connect directly to battery
Accessory 12V
Connect to remote turn-on lead of amplifier
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
Connect it to the car power supply terminal
for antenna
24