Error Displays - Clarion CZ101 Owner's Manual & Installation Manual

DISC Player
Problem
Disc cannot be
loaded.
Sound skips or is
noisy.
Sound is bad
when power is first
turned on.

7. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
ERROR 3
ERROR 5
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
17
Cause
Another disc is already loaded.
There is an object installed inside
the unit.
Compact disc is dirty.
Compact disc is heavily scratched
or warped.
Condensation may form on the
internal lens when the car is
parked in a humid place.
Cause
Disc is inserted incorrectly.
The disc format is not supported.
This is a failure of deck's mechanism. Consult your store of purchase.
Measure
Eject the disc before loading the new
one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
Measure
Eject the disc then reload it properly.
Try another disc.