Clarinet Systems EA104 User Manual
Etherusb and ethir lan admintool
Hide thumbs
Also See for EA104:
- User manual (19 pages) ,
- Specifications (2 pages) ,
- Specifications (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for Clarinet Systems EA104
Summary of Contents for Clarinet Systems EA104
- Page 1 EtherUSB™ AdminTool User Manual V 1.6 Clarinet Systems, Inc.
- Page 2 Clarinet Systems, Inc., 48834 Kato Road, #101A, Fremont, CA 94538 Clarinet Systems and EtherUSB are trademarks of Clarinet Systems, Inc.
-
Page 3: Table Of Contents
Introduction & Login Screeen --------------------------------------------------------------------1 Home Page-------------------------------------------------------------------------------------------2 Identification ----------------------------------------------------------------------------------------3 Network Settings - Device -------------------------------------------------------------------------4 Network Settings – USB Ports -------------------------------------------------------------------5 System Admin - Admin Settings ------------------------------------------------------------------5 System Admin - Firmware Update ---------------------------------------------------------------6 Reports & Stats --------------------------------------------------------------------------------------7 Clarinet Systems, Inc //www.clarinetsys.com Page ii... -
Page 4: Introduction & Login Screeen
This AdminTool also is shared by EthIR LAN™ ESB5001/5004. Login Screen When the EA104 device is plugged in and connected to the network, open an Internet Explorer browser window and enter the following into the URL area and press enter. -
Page 5: Home Page
Home Page This page displays the current settings and configuration being used by the system. For example, if the EA104 device is set for DHCP, the IP Address area will display the DHCP IP address received from DHCP server. The Uptime area displays the duration since the last power cycling of the device, which is calculated and displayed as the number of days with the format xxxx, and hours updated per second with the format xx:xx:xx (<hours:minutes;second>). -
Page 6: Identification
All modifications will take effect only after and “System Restart” are selected on the Admin Settings page or the unit is power cycled. The following box will be prompted once is clicked. The page will be refreshed once is clicked Clarinet Systems, Inc //www.clarinetsys.com Page 3... -
Page 7: Network Settings - Device
All modifications will take effect only after and “System Restart” are selected on the Admin Settings page or the unit is power cycled. The following box will be prompted once is clicked. Clarinet Systems, Inc //www.clarinetsys.com Page 4... -
Page 8: Network Settings - Usb Ports
“System Restart” are selected on the Admin Settings page or the unit is power cycled. The following box will be prompted once The page will be refreshed once System Admin. – Admin Settings Clarinet Systems, Inc is clicked. is clicked. is clicked. //www.clarinetsys.com... -
Page 9: System Admin - Firmware Update
Restart” on the Admin Settings page or power cycling. Only one action at a time: either “System Restart” or “Restore Factory Default” can be selected as “Yes”. The following box will be prompted once is clicked to change password System Admin. - Firmware Update Clarinet Systems, Inc //www.clarinetsys.com Page 6... -
Page 10: Reports & Stats
The following box will be prompted once update is complete (~65 seconds after is clicked), then followed by System Restart which will take another 25 seconds to finish. Caution: please don’t power cycle or reset the device during Firmware Update. Reports & Stats Clarinet Systems, Inc //www.clarinetsys.com Page 7... - Page 11 One hundred latest events will be kept. Event number will restart after power up, System Restart, and Restore Factory Default. The following box will be prompted once “Clear Event Log” is clicked. The page will be refreshed once is clicked. Clarinet Systems, Inc //www.clarinetsys.com Page 8...
Need help?
Do you have a question about the EA104 and is the answer not in the manual?
Questions and answers