Setting Up The Unit; Positioning The Refrigerated Cabinet - Viessmann GALILEI Tecto CI4 User Manual

Table of Contents

5. Setting up the unit

For unloading and handling the cabinet with a forklift, we recommend using the marked handling points as given in

this manual.

We remind you that the use of forklift is exclusively allowed to authorized and properly trained personnel. Dur-

ing the unloading, positioning and installing phases, the personnel should wear suitable personal protection equipment

(i.e. protective gloves, glasses and reinforced shoes). Place the unit, still packed, in the final installation position

in the store. Please see the sections below.

The cabinet cannot be used outdoors. Check the environmental conditions in which the unit will be installed

and match the climate class given on the unit's identification plate (i.e climate class 3, max room temperature of 25°

C, R.H. 60 %). Higher levels of temperature and/or relative humidity can cause higher energy consumptions and poor-

er performances, consequently shortening the shelf-life of the displayed products.

Avoid the exposure of the cabinet to direct sunlight, don't place the unit close to heat sources such as ov-

ens, heating radiators, high-intensity lighting systems and any other heating source.

The unit should not be subject to air flows with a speed higher than 0.2 m/sec. It is highly recommended

that the unit is positioned far from doors, windows and air conditioning grids.

Make sure there is a frequent change of air in the room where the unit is operating even when the store is

closed.

The refrigerated cabinet base is designed to guarantee a proper ventilation of the condensing unit; therefore do

not obstruct the air intakes by placing any type of materials along its external perimeter

To avoid the condensation formation keep a space of 5 cm from the thermopane back-side panel.

Cod. 80005820a - GB

_____________________________

01.02.2021

Table of Contents