Table of Contents
Advertisement
5.3 Parts Descriptions
(1) Power Cord
(2) Power Switch
(3) Power Lamp
(4) SEL / ALARM Lamp
(5) LF Switch
(6) SEL Switch
(7) I/F Connector
(8) Cash Drawer Connector
(9) Printer Cover
(10) Manual Paper Feed Knob
(11) Rear Cover
(12) Winder Connector
(13) Stacker
CITIZEN
Insert the plug end into an electric outlet.
Power is supplied to the printer by turning this switch on.
This lights up when the power switch is "ON" and goes out when turning
"OFF".
This lights up when the printer is in SELECT state (ON-LINE) and goes
out when in DESELECT state (OFF-LINE). The printer can print out the
data only when this lamp is on.
This lamp may blink on the following occasions.
a)
When the paper roll in coming to near-end, the SEL / ALARM lamp
keeps blinking at interval of 1.0 second.
In this case, change the roll paper.
b)
When the printer is in alarm state, this lamp keeps blinking at
interval of 1/4 second. Remove the cause for alarm and press the
SEL switch. (or re-switch the power on)
Paper feeding is performed when this switch is pressed (in DESELECT
status only), this is used when inserting the paper and for spacing up etc.
When this switch is pressed, the printer enters SELECT (ON-LINE)
status. When pressed again, the printer enters DESELECT (OFF-LINE)
status.
This switch is also used when clearing an alarm condition.
And if this switch is pressed when printing, the printer enters DESELECT
status, after all the data in the buffer is printed.
Connects through a cable to a computer etc. Please be certain that power
to both the printer and the computer are turned off when connection is
made.
To be used to control the P.O.S. cash drawer.
Open when replacing the Ribbon Cassette.
Use to adjust the paper position (Available only on pin tractor paper
feeding model).
Cover for paper roll.
Use Model CBM AW-3
Basket for fan-fold paper.
8
iDP3540/3541 User's Manual
Advertisement
Table of Contents
