Data Configuration - Citizen iDP-3310 User Manual

7.3.2 Data Configuration

Mark
Space
(1) Start bit
In 1/2 bit from the Mark-to-Space starting edge, state is read once again. When "Space" state is
confirmed, it is recognized as the start bit. If it is "Mark" state, it is not taken as the start bit. Without
taking it as an error, detection of a start bit is carried out once again.
(2) Data Bit + Parity Bit
Data bit and parity bit are sampled at 1/2 start bit for time length equal to 1 bit. The state thus sampled is
taken as the data for the bit concerned. Bits are named as Bit 0, Bit 1, ..., parity bit counted from the one
close to the start bit.
(3) Stop bit
The stop bit is a mark level of 1 bit or more. With "Space" having been detected on detection of a stop
bit, framing error takes place.
b , b , b ,.........
0 1 2
(1)
(1) Start Bit
(2) Data Bit (+ Parity Bit)
(3) Stop Bit (1 or More)
(2)
28
iDP3310 User's Manual
t
(3)
CITIZEN