Pre-Assembly; Recommended Tools/Materials (Not Included); Hardware/Tools Included - Kreg Straight Edge Guide Owner's Manual

Pre-Assembly

Review this section before you begin. Ensure you have all tools and materials on
hand. Compare the package with the items listed in the Hardware Included and
Product Description sections. Ensure you have a clean, flat area for joining the guide
rails. If any item appears missing or lost, do not use this product. Contact Technical
Support or return product to place of purchase.

Recommended Tools/Materials (Not Included)

#3 Phillips Screwdriver

Hardware/Tools Included

AA
Straight Edge Guide
AA - Set screws x 8
BB - Cutline indicator stop
thumb screws x 2
CC - Cutline indicator stop
nuts x 2
DD - Hex wrench x 1
EE - Handle bolt x 1
FF - Handle nut x 1
F
H
Straight Edge or Level
BB
CC
Straight Edge Guide Extension
AA - Set screws x 8
E
n/a
n/a
n/a
n/a
G
n/a
I
Pencil
DD
Straight Edge Guide XL
AA - Set screws x 24
BB - Cutline indicator stop
A
thumb screws x 2
CC - Cutline indicator stop
nuts x 2
DD - Hex wrench x 1
EE - Handle bolt x 1
FF - Handle nut x 1
D
EE
FF
B
C
3