Operation - pro user RVC3600 Manual

OP ERATI ON
The monitor will automatically turn on when the vehicle is in reverse gear.
There are 5 control buttons available for users to have their controls:
P o w e r b u t t o n
Press the POWER button to supply power to the monitor. When the monitor image is on,
the blue LED will be lit. If there is power to the monitor, but the monitor image is OFF,
the blue LED will blink on and off. When the monitor power is off, no picture can appear
on the screen and the blue LED will be off.
Me n u b u t t o n
Press the Menu button to enter the menu screen as shown below:
To change the orientation of the screen image, press the menu button until
selected. By pressing the
To exit the menu screen, select
Gu id e lin e b u t t o n
This camera system has the option to show distance-
guidelines on the display. This helps you to visually see
the distance between the objects behind your car. By
pressing the guideline button, you can switch this option
on and off.
Repeat pressing the Menu button to select
,
c o n t ra s t c o lo u r
Press the + button or – button to adjust settings within the
control selected. Press the
press the button to decrease the value.
–
or button repeatedly, different screen orientations will be
+ -
on the screen.
e x it
Menu button
Power button
Guideline button
or of the picture.
d ire c t io n
button to increase the value and
+
available. These different views allow you to
mount the camera and monitor in any
position with keeping the right picture on the
monitor.
,
B rig h t n e s s
is
d ire c t io n