Microsensor MPM4881 Operation Manual page 9

·3 seconds later, it displays the setting value
Press P1 Display
③ Set hysteresis
·Press corresponding button ,eg. "H1"
·Display hysteresis code, eg."HYS1"
·2 seconds later, it displays real time setting value
·Press"+"or"－"key to change value
·3 seconds later, it displays the setting value
Press H1
④ Analog output
MPM/MDM4881
(Please adjust at Basic Settings Menu)
3 、 Max. value is the max. pressure when MPM/MDM4881 is
started or the last time to be reset
① Display max. pressure ：Press button P4 and H4 at the
same time
Set switch point
Set switch point
display Set hysteresis
Set hysteresis
output 4mA~20mADC
6
or 0V~10VDC