Important Safety Instructions - Dyson pure cool Operating Manual

Hide thumbs Also See for pure cool:
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS MACHINE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN
THIS MANUAL AND ON THE MACHINE
When using an electrical machine, basic precautions should always be followed, including the
following:
WARNING
THE MACHINE AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS.
1.
Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your
household has a pacemaker or defibrillator, avoid placing the remote control in a pocket or near to the
device.
2.
Credit cards and electronic storage media may also be affected by magnets and should be kept away
from the remote control and the top of the machine.
WARNING
These warnings apply to the machine, and also where applicable, to all tools, accessories,
chargers or mains adaptors.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
3.
This Dyson machine is not intended for use by persons (including children) with reduced physical,
sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the machine by a person responsible for their safety.
4.
Ensure machine is fully assembled in line with the instructions before use. Do not dismantle the machine
or use without the loop amplifier fitted.
5.
Do not allow to be used as a toy. Close attention is necessary when used by or near children. Children
should be supervised to ensure that they do not play with the machine.
6.
Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than
that shown in this manual, or advised by the Dyson Helpline.
7.
Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces and do not expose to water or
rain.
8.
Do not handle any part of the plug or machine with wet hands.
9.
Do not operate any machine with a damaged cord or plug. Discard the machine or return to an
authorized service facility for examination and/or repair. If the supply cord is damaged it must be
replaced by Dyson, its service agent or a similarly qualified person in order to avoid a hazard.
10. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left
outdoors, or dropped into water, do not use and contact the Dyson Helpline.
11.
Do not stretch the cord or place the cord under strain. Keep cord away from heated surfaces.
12. Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners or similar
coverings. Do not route the cord under furniture or appliances. Arrange the cord away from traffic area
and where it will not be tripped over.
13. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. The use of an extension
cord is not recommended.
14. Do not put any object into openings or the inlet grille. Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce airflow.
15. Do not use any cleaning agents or lubricants on this machine. Unplug before cleaning or carrying out
any maintenance.
16. Always carry the machine by the base, do not carry it by the loop amplifier.
17.
Turn off all controls before unplugging. Unplug from outlet when not in use for extended periods. To
avoid a tripping hazard, safely coil the cord.
18. Do not use near furnaces, fireplaces, stoves or other high temperature heat sources.
19.
Do not use in conjunction with or directly next to an air freshener or similar products. Do not spray or
apply perfumes directly on or near the filter. Keep essential oils and chemicals away from the machine.
20. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check the product. If the replacement
fuse blows, a short-circuit may be present and the product should be discarded or returned to an
authorized service facility for examination and/or repair.
2

Advertisement

Table of Contents
loading

Table of Contents