Maximum MERLIN Installation Manual

Maximum has designed a system that captures all its exterior sensor options and transmits the
weather conditions through your home or business wi-fi network.
display on our beautiful weather instruments and or interface with the Weather Underground
website to monitor your installation remotely.
Weather Underground visit their website
screen prompts to obtain a station id and password that will be required during the Captive Portal setup.
PROPER INSTALLATION IS IMPORTANT. IF YOU NEED ASSISTANCE, CONSULT A CONTRACTOR, ELECTRICIAN
OR TELEVISION ANTENNA INSTALLER (CHECK WITH LOCAL BUILDING SUPPLY, OR HARDWARE STORE FOR
REFERRALS). TO PROMOTE CONFIDENCE, PERFORM A TRIAL WIRING (BENCH TEST) BEFORE INSTALLATION.
WIND DIRECTION
SENSOR
RED WIRE
RED WIRE
TERMINAL 4
GREEN WIRE
GREEN WIRE
TERMINAL 5
WHITE
WHITE
WIRE
GREEN
GREEN
RED
RED
BLACK
WIRE
WIRE
WIRE
WIRE
WIRE
MERLIN
INSTALLATION
WIND SPEED
SENSOR
BLACK
WIRE
WHITE
WHITE
WIRE
12 VOLT
POWER
SUPPLY
WI-FI SENSOR
INTERFACE
WI-FI
OVERVIEW
If you would like to monitor your station on
www.wunderground.com
BENCH TEST
1
Connect the of the 2-conductor RED and GREEN wires to the
bottom of the WIND DIRECTION SENSOR. Note that the RED wire
connects to TERMINAL 4 and the GREEN wire goes to TERMINAL 5.
.
Connect the other ends of the RED and GREEN wires to
the WI-FI SENSOR INTERFACE. The RED wire connects to
TERMINAL 4 and the GREEN wire connects to TERMINAL 5.
Connect the BLACK and WHITE wires to
3
the terminals of the WIND SPEED SENSOR.
Connect the other ends of the BLACK
WHITE
and WHITE wires to TERMINALS 1 and
2 of the WI-FI SENSOR INTERFACE.
Samuel Barnett Boulevard
New Bedford, MA 02745
(508) 995-2200
Page 1
You can use this signal to
and join.
RED GREEN
GREEN
RED GREEN
RED
GREEN
WHITE
Follow the
RED
2
4