Raider RDP-EP10S User Manual page 10

10 www.raider.bg
must be repaired.
4.3. Before you modify the settings of the
power plane, to replace blades and attachment,
and when a long time not using it, unplug the
plug from the supply network. This measure
eliminates the danger of triggering electrical
plane inadvertently.
4.4. Keep electrical plane in places where
it can not be reached by children. Do not let it
be used by persons who are not familiar with
how to work with him and have not read those
instructions. When in the hands of inexperienced
users, the power plane can be dangerous.
4.5. Keep electrical plane carefully. Check
whether the mobile units operate impeccable,
whether it spells, if there is a broken or damaged
item which distort or alter the functions of the
electric plane. Before using electrical plane,
make sure that the damaged parts to be repaired.
Many accidents are caused by poorly maintained
power tools and appliances.
4.6. Use the power plane, the additional
devices, working tools, etc., according to the
manufacturer's instructions. In doing so must
comply with specific operating conditions and
operations to perform. Using electric grater for
other than those provided by the manufacturer
applications increases the risk of accidents.
5. Guidelines for the safe handling, specific
purchased your electric plane.
When working with electrical plane wear ear
protectors. Effects of loud noise can damage
your hearing. Keep electrical grater tightly with
both hands. Loss of control over power could
lead to the occurrence of accidents.
5.1. Do not use additional devices which
are not recommended by the manufacturer
specifically for that power. The fact that you
can attach to the machine specified device or
instrument used does not ensure safe working
with him.
5.2. If you perform activities which threaten
the working instrument to fall on hidden wires
under tension or affect the power cord, hold
power only electrically isolated handles. When
entering the working tool in contact with the
wires under tension, it is transmitted through the
metal parts of electrical plane and this may lead
to electric shock.
5.3. Keep the power cord a safe distance from
rotating work tools. If you lose control over the
power plane, the cable can be cut or fascinated
by the working tool and it can cause injuries.
5.4. Never leave electrical plane before the
shaft with blades to completely stop spinning his.
Turntable shaft can touch the object, resulting in
losing control over the power plane.
5.5. Regularly clean the vent on your electric
plane.
5.6. Do not use electrical plane near
flammable materials. Flying sparks can cause
the ignition of such materials.
5.7. Never put your hands near the rotary
working tools.
5.8. Do not put your hands in the hole for the
disposal of sawdust. You can hurt yourself by
rotating parts.
5.9. If the supply voltage is interrupted
(for example due to blackouts, or if the plug is
removed from contact) unblock the trigger switch
and place it in position "off". This will prevent
uncontrolled inclusion of electrical plane.
5.10. Touch-plane to the work piece only after
you've turned and reached maximum speed and
then switch after you have separated themselves
from the elements. Otherwise, the plane can
bounce suddenly.
5.11. Provide work piece. Detail, and
attach with appropriate appliances or braces is
anchored more firmly and securely than if you
hold it by hand.
5.12. Work only with sharp knives. Do not use
worn or damaged blades.
5.13. Before starting work with the plane
make sure the treated material would metal
objects such as nails or screws.
5.14. Never planning in metal objects, nails or
screws. Blades and shaft will be damaged and
will cause dangerous vibrations.
5.15. Dust released during the processing of
materials, such as containing lead paint, some
types of wood can be hazardous to health.
Contact to the skin or inhalation of such powders
can cause allergic reactions and / or respiratory
illnesses to working with power tools or nearby
persons. Certain powders, for example released
during the processing of beech and oak are
considered to be carcinogenic, particularly in
combination with chemical treatment of wood.
5.16. When interruption is always empty dust
bag.
5.17. Do not use electric plane, where the
power cord is damaged. If during operation the
cable is damaged, do not touch. Immediately
disconnect the plug from the outlet. Damaged
power cables increase the risk of electric shock.
Failure of the considered instructions may
lead to electric shock, fire and / or severe injuries.
6. Functional description and purpose of the
power plane.