Table of Contents
Advertisement
10
www.raider.bg
4.4. Keep electrical plane in places where it can
not be reached by children. Do not let it be used by
persons who are not familiar with how to work with
him and have not read those instructions. When in
the hands of inexperienced users, the power plane
can be dangerous.
4.5. Keep electrical plane carefully. Check
whether the mobile units operate impeccable,
whether it spells, if there is a broken or damaged
item which distort or alter the functions of the
electric plane. Before using electrical plane, make
sure that the damaged parts to be repaired. Many
accidents are caused by poorly maintained power
tools and appliances.
4.6. Use the power plane, the additional devices,
working tools, etc., according to the manufacturer's
instructions. In doing so must comply with specific
operating conditions and operations to perform.
Using electric grater for other than those provided
by the manufacturer applications increases the risk
of accidents.
5. Guidelines for the safe handling, specific
purchased your electric plane.
When working with electrical plane wear ear
protectors. Effects of loud noise can damage your
hearing. Keep electrical grater tightly with both
hands. Loss of control over power could lead to the
occurrence of accidents.
5.1. Do not use additional devices which are
not recommended by the manufacturer specifically
for that power. The fact that you can attach to the
machine specified device or instrument used does
not ensure safe working with him.
5.2. If you perform activities which threaten the
working instrument to fall on hidden wires under
tension or affect the power cord, hold power only
electrically isolated handles. When entering the
working tool in contact with the wires under tension,
it is transmitted through the metal parts of electrical
plane and this may lead to electric shock.
5.3. Keep the power cord a safe distance from
rotating work tools. If you lose control over the
power plane, the cable can be cut or fascinated by
the working tool and it can cause injuries.
5.4. Never leave electrical plane before the
shaft with blades to completely stop spinning his.
Turntable shaft can touch the object, resulting in
losing control over the power plane.
5.5. Regularly clean the vent on your electric
plane.
5.6. Do not use electrical plane near flammable
materials. Flying sparks can cause the ignition of
such materials.
5.7. Never put your hands near the rotary
working tools.
5.8. Do not put your hands in the hole for the
disposal of sawdust. You can hurt yourself by
rotating parts.
5.9. If the supply voltage is interrupted (for
example due to blackouts, or if the plug is removed
from contact) unblock the trigger switch and place
it in position "off". This will prevent uncontrolled
inclusion of electrical plane.
5.10. Touch-plane to the work piece only after
you've turned and reached maximum speed and
then switch after you have separated themselves
from the elements. Otherwise, the plane can
bounce suddenly.
5.11. Provide work piece. Detail, and attach with
appropriate appliances or braces is anchored more
firmly and securely than if you hold it by hand.
5.12. Work only with sharp knives. Do not use
worn or damaged blades.
5.13. Before starting work with the plane make
sure the treated material would metal objects such
as nails or screws.
5.14. Never planning in metal objects, nails or
screws. Blades and shaft will be damaged and will
cause dangerous vibrations.
5.15. Dust released during the processing of
materials, such as containing lead paint, some
types of wood can be hazardous to health. Contact
to the skin or inhalation of such powders can cause
allergic reactions and / or respiratory illnesses
to working with power tools or nearby persons.
Certain powders, for example released during the
processing of beech and oak are considered to
be carcinogenic, particularly in combination with
chemical treatment of wood.
5.16. When interruption is always empty dust
bag.
5.17. Do not use electric plane, where the power
cord is damaged. If during operation the cable is
damaged, do not touch. Immediately disconnect
the plug from the outlet. Damaged power cables
increase the risk of electric shock.
Failure of the considered instructions may lead
to electric shock, fire and / or severe injuries.
6. Functional description and purpose of the
power plane.
Electric grater is hand power to the exclusion
II class. He is driven by a collector single-phase
motor whose speed is reduced by means of belt
transmission. Electrical plane is designed for
planning and bevel the edges of flat surfaces of
wood and wood materials. Not permitted the use
of power tools for activities other than its intended
purpose.
7. Information emitted noise and vibration.
The values are measured according to EN
Advertisement
Table of Contents
