Table of Contents
Advertisement
7.2.3
Abnormal States
1. If the configuration fails, the reasons may be:
1) Router password is wrong.
Suggestion: Please click [Retry] and check the password.
2) The router's network signal is weak, and the logger is too far away from the router.
Suggestion: Please put the router closer to the logger or use a repeater.
3) Click too fast during the Logger's AP connection.
Suggestion: Please wait a few seconds and then jump to the configuration after Logger's AP is
connected.
2. If you encounter following situations, please reconfigure logger network:
1) Change router
2) Change WiFi password
3) Change router's SSID
4) Enterprise routers may restrict WiFi connectivity.
Please ensure the data logger is working properly before leaving the site.
If issues arise, contact customer service immediately.
Warning
13 / 14
Advertisement
Table of Contents
