Ap Configuration; Entering Configuration Mode - CanadianSolar CSI-WIFI-2 Quick Manual

2) If the signal lights flash slowly or keep on, which indicating that the network has been successfully
accessed;
3) If configuration fails, please check again in a few minutes, or please reconfigure it.
If the configuration process lasts more than 20s, that means configuration failed.
Please follow the steps as bellow:
1) Check the fault reason, click to go back, configure again.
Notice
2) If still not succeeded, click to switch configuration mode, entering AP configuration.

7.2 AP configuration

7.2.1 Entering configuration mode

Connect the phone to your own WiFi network, and type in the WiFi password to enter the configuration
process.
Note:
1. If the network is not the one you want to configure with the WiFi stick, switch the network. When
switching the account, you can manually enter your network account.
2. 5G WiFi is not supported.
11 / 14