Table of Contents
Advertisement
7.2.2 Connecting WiFi network
Go to [Network Settings] interface and select the data logger's network AP_XXXXXXXXXX(S/N). Then
return to APP, the data logger will start to configure.
Normally, configuration process will take 3-5mins
If it is unable to find an AP_XXXXX(S/N) in wireless network list, please make sure the
distance between the WiFi router and data logger is less than 10 meters.
If there is any problem during the connection or setting process, you can repeat the
above steps.
Notice
If you still cannot find the AP_XXXXX, you can check the logger manual for
troubleshooting or contact our Customer Service.
12 / 14
Advertisement
Table of Contents
