Table of Contents
Advertisement
Choose to scan the barcode of the collector, or directly enter the SN number below the barcode to add
it, then click the [Add] button to go to the next page.
6.4.2 Select correlated devices
On this page, you can stipulate how the logger selects the device associated with it. The default mode is
"Automatic Selection". If you do not have special requirements, please click the [Done] button to confirm.
After the confirmation is completed, the logger will be added to the plant.
7. WiFi Networking Configuration
If your logger is a Wi-Fi module, it will need to be networked for normal use.
On the specific plant page, click the [...] button in the upper right corner, select [Device] to enter the
device page, select the logger to be configured, and click the [Device networking] button to configure.
9 / 14
Advertisement
Table of Contents
