Beko BKK 2207 SK User Manual page 12

Operation
3
Check if the mains
voltage on the type
C
plate on the handle
of the appliance cor-
responds to your
supply.
4. Turn on the appliance with switch
(5) and set the blower level
(See 3.2.2) .
5. Set the temperature level with
switch (4) (See 3.2.3) .
6. While drying, you can interrupt
the hot air flow, by pressing and
holding down (3) (Cool Shot)
(See 3.2.4) .
The Cool Shot inter-
rupts the hot air with
C
a flow of cold air. This
allows you to fix your
hairstyle better and
more lastingly.
7. If required, switch to the ion
supply while drying by pressing
the (6) button.
– If the ion supply is switched on,
the display lights up in the (6)
button.
12 / 23 EN
8. After use, switch off the appli-
ance with the (5) button and pull
out power cord (7) from the wall
socket.
WARNING: Never
wind the power cord
(7) around the ap-
A
pliance, as this can
result in damage.
Check the power
cord (7) and the ap-
pliance regularly for
visible damage.
Hair Dryer / User Manual