Table of Contents
Advertisement
iPECS-CM
Feature Description and Operation
1)
Lift the handset or press [SPEAKER] button.
2)
Dial a digit and wait until "One Digit Service Time" is expired.
3)
Call will be placed to the destination configured in One Digit Service Table.
Conditions
Up to 12 (0~9, *, #) One Digit Service can be configured through WMS.
Call Restriction and Class are maintained even when this feature is used.
This feature is not available for office extension.
If One Digit Service Time is not set up, the service is not available.
Related WMS Menu
Data Management > Hotel Information > Hotel General Configuration> "One Digit Service Time", "One Digit
Service Table"
Related Features
Hardware
1.15 Room Monitor/Baby Listening
Description
It allows guests to monitor their rooms from the other station in the Hotel.
While monitoring Room, sound of monitoring station is not delivered to the monitored extension.
Operation
Guest Station
To enable Room Monitoring:
1)
Lift the handset or press [SPEAKER] button.
2)
Enter {Hotel Room Monitor} feature code; Service Set Confirmation Tone is heard and the extension
begins monitoring.
To disable Room Monitoring:
1)
Hang up the monitored call and press the active [SPEAKER] button.
2)
The extension changes to on-hook state and extension monitor is finished.
To start Room Monitoring:
1)
Lift the handset or press [SPEAKER] button.
2)
Enter a room number; DND rejection tone is heard.
3)
Enter the room number again.
Conditions
It is only available through ICM call in the system, not Trunk call.
20
Issue 2.6
Advertisement
Table of Contents
