Table of Contents
Advertisement
Removing the monitor stand
CAUTION: To prevent scratches on the LCD screen while removing the
stand, make sure that the monitor is placed on a soft, clean and flat
surface.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
To remove the stand:
1.
Place a flat cushion or a sitting mat near the edge of a table and place the
monitor on it with the display facing down.
2.
Press the stand down to access to the stand release button.
3. Use a long screwdriver to press the release latch.
4.
While pressing the release latch, slide out the stand assembly from the monitor.
Setting up the monitor
|
35
Advertisement
Table of Contents
