Connection Ports; Mdx Adaptor; Md21 Connection Ports - ABB M10 Series Manual

0 9. OPERATOR PANEL MDx

Connection ports

There are two connection ports available on MDx
panel. RJ11 port which locates on the back of the
panel connects to M10x main unit. A mini USB port
is available on the front for parameterization con-
nection.
A dedicated parameterization cable is required to
connect between MDx panel and the laptop.
—

60 MD21 connection ports

MDx adaptor

MDx adaptor is the adaptor kit which is designed
to connect M10x main unit to an external MDx
control panel. MDx adaptor kit include a compact
IP65 socket which is to be installed on the front
—
61 Connection between M10x and MDx
If MD21 cannot read the information
from M10x, a "No Comm" message ap-
pears. This may refer to a bad connec-
tion between MD21 panel and M10x or
a possible failure in M10x main unit.
panel of the each starter and a couple of
connection cables. The connection between M10x
and MDx is shown in Fig61. Details of ordering,
please refer to M10x ordering guide.
85