Advertisement
•
Buyer agrees to indemnify and hold Laguna Clay Co. harmless from and against all claims and
damages, imposed upon or incurred, arising directly or indirectly from Buyer's failure to
perform or satisfy any of the terms described herein. In no event shall Laguna Clay Co. be liable
for injuries of any nature involving the product, including incidental or consequential damages
to person or property, any economic loss or loss of use.
Getting down to business: Setting up and using your Pacifica Wheel:
•
Choose a comfortable location for use of the wheel allowing you to plug the wheel directly into
the electrical outlet.
•
Ensure the wheel is located on level ground.
•
Always turn your wheel OFF when not in use.
•
Depress foot pedal in the full OFF/ STOP position prior to turning the wheel ON or OFF.
•
Position yourself in front of the wheel with wheel head towards you.
•
Use the Forward/ Reverse switch to select the direction you want the wheel to rotate.
•
Depress the foot pedal up and down several times to familiarize yourself with the variable
speed and stopping.
•
You are now ready to throw on your new Pacifica Potter's Wheel.
Troubleshooting Guide:
Wheel will not turn on. No power to the wheel:
•
Is your wheel plugged into the power source? Make sure wheel plug to outlet and cord to
control box are plugged in tight.
•
Is your power outlet providing the correct amount of electrical current?
•
Are you using the same circuit for other wheels, equipment or appliances?
•
Check the indicator light to ensure it lights up when the ON/ OFF button is depressed.
•
If the ON/ OFF light is on and the wheel will not turn, check the breaker and push to re-set.
•
Plug your wheel into a different outlet and/or check to re-set GFI (Ground Fault Interrupter) on
the wall outlet.
•
Check your home breaker box to ensure breaker has not been tripped.
Light comes on but wheel head will not turn:
•
Make sure the direction switch is set to either forward or reverse position
•
If you hear the motor running and the wheel head is not turning, the belt may have come off
the pulley. Refer to Tensioning Belt instructions below or visit Laguna Clay Company's You Tube
Chanel for step by step video instructions.
https://www.youtube.com/watch?v=Iw5cpbXNc24
6
Advertisement
