Before Installation; Removing The Fridge And Freezer Door - LG GC-B247 JEDV Owner's Manual

global_main.book.book Page 12 Thursday, February 20, 2020 1:36 PM
EN 12 INSTALLATION

Before Installation

Dimensions and Clearances
Too small of a distance from adjacent items may
result in the degradation of freezing capability and
increased electricity costs. Allow over 50 mm of
clearance between the back of the appliance and
the wall when installing the appliance.
A
B
C
-
A
B
C
D
E
F
G
H
NOTE
• You can determine what type of appliance it is by
looking at the label inside the appliance.
Ambient Temperature
• The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone.
F
D E G
H
Type A (mm)
912
1790
717
615
690
717
1040
1640
• The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
• The climate class can be found on the rating
label.
Climate Class Ambient Temperature
Range ºC
SN (Extended +10 - +32
Temperate)
N (Temperate) +16 - +32
ST (Subtropical) +16 - +38 / +18 - +38**
T (Tropical) +10 - +43* / +16 - +43 /
+18 - +43**
* Australia, India, Kenya
** Argentina, Ecuador
NOTE
• The appliances rated from SN to T are intended
to be used at an ambient temperature between
10 ºC and 43 ºC.
Removing the Fridge and
Freezer Door
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
WARNING
• Disconnect the power cord, house fuse or circuit
breaker before installing, removing the doors, or
cleaning the appliance. Failure to follow these
instructions may result in death, fire or electric
shock.
Removing the Freezer Door
1
Remove the screw from the hinge cover at the
top of the appliance. Lift the hook, located at