Yaesu FT-5100 Technical Supplement page 4

Case Disassembl y
&
Board Locations
D
Turn off the transceiver, and disconnect all
cables .
Main Unit So Ider Side Access
D
Referring to Figure 1, remove the six screws
from the top cover to expose the solder side
of the Main Unit.
·Other Units
D
Referring to Figure 2, remove the six screws
in the bottom cover. When removing the bot­
tom cover, use care not to strain the wires to the
loudspeaker.
Unit
4 30 MHz PLL
1-2
General
Unit
144 MHz PA
PCB Locations are indicated in Figure 4.
To access the Control and Panel Units, re­
move the two screws in the front panel indi­
cated in Figure 3 .
Control Unit
FT- 5100
Unit
IF
Unit
AF
Unit
144 MHz PLL
Regulator (REG) Unit
Technical Supplement