Display - Introduction - Hantek HDM3000 User Manual

Display - Introduction

By default, the instrument displays the reading in digital form. You can also select bar
meter, trend chart or histogram display:
For "digital" and "bar meter" displays, many of the main measurement functions allow
the display of auxiliary measurement results.
Select Display
Press the
type:
The table below summarizes all display types for each measurement mode.
model
Continuous
Key, and then press the Display soft key to select the Display
digital The bar
meter
Be selected Digits +
by default
Bar chart.
when
Display the
booting.
measured
Display the
results on
Display type
Trend chart
histogram
Measurement results
spanning a specified
length of time.
Displays as a bar chart
(trend
53
Remarks/Uses
Show trend and
the histogram
data only.
There is no
readings on the
front panel.