Measurement - Hantek HDM3000 User Manual

Measurement

HDM3000 DMM supports many common measurements:
The DC voltage
The AC voltage
The DC current
The AC current
The resistance
The temperature
The capacitance
The continuity
The diode
Frequency and period
Auxiliary measurement
The DC voltage
This section describes how to configure DC voltage measurements from the front panel,
including DCV proportional measurements.
Step 1: Configure the test leads, as shown below.
Step 2: Press [DCV] on the front panel.
Step 3:
For HDM3000, Press Aperture and select the number of power line cycle (PLC)

for measurement. Only 1, 10 and 100 PLCs provide normal mode (line frequency
24