Phase Correction [Pha corr]
Action
1)
Press the MENU button to enter the setup
menu.
2)
Press the UP/DOWN buttons until you
reach [Pha corr].
3)
Press MENU to enter the sub-menu.
4)
Press UP/DOWN buttons to choose
between Yes and No.
5)
Press ESC button to activate.
DMX Address [Dmx addr]
Action
1)
Press the MENU button to enter the setup
menu.
2)
Press UP/DOWN buttons to choose
between [Block] and [Single]
configuration.
3)
Press MENU button to enter the sub-menu.
BLOCK
1)
Press the ESC button to confirm.
2)
Press UP/DOWN buttons to select the start
address between 001 and 512.
SINGLE
1)
In [Chan[1]]/Single Channel mode press
MENU to change between the channel and
its' start address as noted by the cursor.
2)
In [Chan], press UP/DOWN buttons to
select channels 1~12. In [001], press
UP/DOWN buttons to select dmx start
address [001-512].
3)
Press the ESC button to exit and confirm.
TFX-D12 User Manual
Pha corr
(Yes) or (No)
Dmx addr
(Block) or (Single)
Dmx addr
Block
Chan [1]
[001]
10
Operating Instructions
Block – Block
addressing refers to
12 consecutive
channels using only
one starting address.
Single – Allows the
user to select a
starting address for
each channel.
Start
[001]
Chan [1]
[001]
2004-11-11/11:32