F2 Method - Klima C16 Manual

F1c) When you have inputted your Wi-Fi password, press the button
labelled 'CONFIRM'.
F1d) You will then be taken to a screen which will connect your
thermostat to your Wi-Fi network, wait until the circle has gone
green.
F1e) It will then load another screen with a button at the bottom
labelled 'DONE'.
(IF this comes up with a message 'NO REPONSE FROM DEVICE TRY
"SWITCH PAIRING MODE"' this means that you will have to use the
F2
Method)

F2 METHOD

F2a) Go back to how to select Wi-Fi mode section and follow the
F2.
steps to select Then follow points 3 -> 5.
F2b) Select the option at the top right labelled 'OTHER MODE'
F2c) Select option labelled 'AP MODE'
F2d) Input your Wi-Fi password (from router) then press the button
labelled 'CONFIRM'
F2e) Press the button that says, 'CONNECT NOW'. You will then be
taken to your setting's page on your phone, select the Wi-Fi settings
page.
F2f) In the Wi-Fi settings page you will see a network beginning with
'SMARTLIFE', select this network.
F2g) Once this Wi-Fi is selected, then need go back onto the app and
allow the system to connect.
Page. 3