Klima C16 Manual

Klima C16 Manual

Wi-fi trouble shooting
Hide thumbs Also See for C16:

Advertisement

C16 Wi-Fi Trouble shooting

Wi-Fi mode selection:

F1 ->
This mode will connect the thermostat directly to your Wi-Fi
and allow you wherever you are to control your underfloor heating
(requirement 2.4GHZ Wi-Fi please note high level firewall or parental
controls can cause issues with trying to connect the system as it can
block the connection to the router)
F2 ->
This mode will make the Wi-Fi thermostat emit its own Wi-Fi
signal , it then uses your phone to allow it to connect to your Wi-Fi
router allowing you to control your thermostat anywhere.(This
method should be done if

How to select a Wi-Fi mode:

To select a Wi-Fi mode, you must press the
the thermostat
Press them at the same time and hold down, once
release both buttons.
Then to select
F2
change it to
Page. 1
F1
setting does not allow you to connect).
.
˄
F2
press the
then both buttons
˄
˅
and the
again and then it will
.
˅
and the
together on
F1
appears then

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C16 and is the answer not in the manual?

Questions and answers

Summary of Contents for Klima C16

  • Page 1 C16 Wi-Fi Trouble shooting Wi-Fi mode selection: F1 -> This mode will connect the thermostat directly to your Wi-Fi and allow you wherever you are to control your underfloor heating (requirement 2.4GHZ Wi-Fi please note high level firewall or parental...
  • Page 2 How to connect your phone to the Wi-Fi thermostat: 1) Download the app ‘WARMME’, the app icon should look like this: 2) Open the app and follow the log in instructions to create a profile. 3) Once on the main app page, it shall say ‘NO DEVICES, PLEASE ADD’.
  • Page 3 F1c) When you have inputted your Wi-Fi password, press the button labelled ‘CONFIRM’. F1d) You will then be taken to a screen which will connect your thermostat to your Wi-Fi network, wait until the circle has gone green. F1e) It will then load another screen with a button at the bottom labelled ‘DONE’.
  • Page 4 F2h) When the circle goes green it means your connected then press the button labelled ‘DONE’. F2i) You are ready to start using your Wi-Fi thermostat. Page. 4...

Table of Contents