Subscribe to Our Youtube Channel
Related Manuals for Klima C16
Summary of Contents for Klima C16
- Page 1 C16 SIMPLIFIED INSTRUCTIONS C16 Thermostat Index: Explanation of symbols Start-up Wizard Programming Trouble shooting 1 Explanation of symbols Page 1 of 11...
-
Page 2: Startup Wizard
2 Start-up Wizard Clock This section allows the day of the week to be changed. The day can be changed by pressing the up or down arrow. When the correct day has been selected press the middle. button. This section allows the hour to be changed. The hour can be changed by pressing the up and down arrow. -
Page 3: Sensor Selection
Sensor Selection 00 => Floor Sensor : run by floor sensor(default) 01 => Room-in Sensor : run by built-in room sensor (built into thermostat) 02 => Room-in sensor and floor sensor : run by built-in sensor with floor temp limit. 03 =>... - Page 4 Office 3 Program Temporary Override Temperature: press the change the temperature and this will act as a temporary boost. This boost will only be on during that time period. Mode: To select a mode, press the Default mode: This will follow the program which has been programmed in by yourself or the default program Anti-frozen mode: During this...
- Page 5 3.3 Key-Lock This allows the thermostat buttons to be locked and no buttons to be pressed. To lock the thermostat press and hold for 3 seconds to lock the thermostat to unlock the thermostat repeat the same process. 3.4 Menu On the main page of the thermostat press and hold the for 3 seconds to enter menu.
- Page 6 Various Settings (Further settings for the thermostat) 1) Sensor Selection (allows the sensor to be changed) 2) Room temperature calibration 3) Floor temperature Calibration 4) Floor temperature Limit 5)Schedule selection (program days of the week) Page 6 of 11...
- Page 7 6)Used for heating or cooling 7)Adaptive function 8) Thermostat located in home or office 9)Reset to factory settings Back to main app page 3.4.1 Clock The default interface of the menu is CLK(Clock). The day and time are set in this setting.
- Page 8 • Press the to enter the hour setting • Press the to change the hour • Press the to enter the minute setting • Press the to set the minutes • Press the to go back to the main page 3.4.2 Event setting Default parameters To change the parameter and set Events.
- Page 9 - Press to enter the minute’s - Press to set the minute for the program starting time - Press to enter the temperature setting - Press to select a temperature - Press to go back the Event menu setting, or to go back to day selection if it’s on the last event 3.4.3 Readout - Work out the time of which the thermostat is on for as a percentage, E.G.
- Page 10 Sensor Selection: There are 5 options: 00 => Floor sensor (default setting) 01 => Room-in Sensor (Ran by built in air sensor) 02 => Room-in Sensor and Floor Sensor (Ran by built in air sensor with floor temp limit) 03 => Room-out Sensor (Ran by an external room sensor) 04 =>...
-
Page 11: Troubleshooting
Adaptive function learns over time when it is the best time to come on and heat the floor to reach the required temperature at the next period. Thermostat located in office or home Reset thermostat to factory defaults 8.5 Open Window Detection This function only works when Room sensor OR floor and room sensor are selected.
Need help?
Do you have a question about the C16 and is the answer not in the manual?
Questions and answers