Advertisement
Available languages
Available languages
Descripción
Activate or deactivate
sending of low battery alert
via SMS
Set up zone type for
sensors
External siren volume
adjustment
Turn SMS sending on or off
when disconnecting from
the power supply
Activate or deactivate SMS
sending when remote con-
trol activates and deactivates
the alarm
Restore Default Settings
(This command will not
remove the controls or
detectors)
How to connect to Google Home
1.
Download and install the "Google Home" App previously set up with your Gmail account and your
virtual assistant.
2.
Click on add "+" and then click on "Setup device". then, in the section "Works with Google", click
on the search bar and type in Lloyds Smart. When you get the icon, click on it. Then press the "Con-
firm authorization" button and wait a few seconds.
3.
Once you have linked Lloyd's Smart, the devices added to your account will be displayed, click on
"X" (upper left corner) and return to the main screen. Now you can ask your assistant to control the
smart devices.
NOTE: If you want, you can rename the devices from Lloyds Smart to
control them with voice commands. Each time you rename a device, ask
your assistant the following command: "Ok Google, synchronize devices" or
update from the Google Home App.
Here are some examples of voice commands you can use:
34
Comando
59
[Zone (01-10)] + [Zone
60
type (1-5)] + [1 to turn
on / 0 to turn off].
1: Normal Zone.
2: Leave Zone.
3: Smart Zone.
4: Emergency Zone
5: Close Zone
62
64
68
13
"Ok Google, arm alarm system in away mode".
"Ok Google, arm alarm system in home mode" .
"Ok Google, disarmed alarm system ".
NOTE:
A code is required to deactivate the alarm.
Parámetro
[1 to turn on / 0 to turn
off]
[00 to 99 Intensity]
[1 to turn on / 0 to turn
off]
[1 to turn on / 0 to turn
off]
[0000]
Ejemplo
1234590#
1234600220#
12346250#
1234641#
1234681#
1123430000#
Advertisement
