Advertisement
Available languages
Available languages
Plug in the device, then press for 5 seconds
the reset button (CDDE) on the main unit.
Check that the STATUS light on the main unit
is flashing quickly and confirm it in the App (4).
Enter your Wi Fi network information and its
password, click on "Next" (5).
Once the alarm system is set up, you can change the name
Wait for the device to
configure
After completing the setup, find and select the
alarm system in the list
it through the App from wherever you are, it just
requires an internet connection.
6
7
(8)
to be able to control
4
(6)
and finally click "Done" (7).
NOTE
Make sure that the Wi Fi password you enter is
correct and that during the process, the device
is near the modem.
8
5
23
Advertisement
