Operation - Defiant DFI-5982-BZ Use And Care Manual

Installation (continued)
6
Mounting the light fixture
NOTICE: The two pins on the rear of the light fixture must be
inserted into the terminal block for the light to work.
□
Slide the light fixture (B) onto the mounting
plate (D).
□
Tighten the two decorative screws (CC)
securely. Do not overtighten.
NOTICE: When attaching this light to an external, surface mount
junction box, caulk around the inside of the light fixture (B) before
attaching to the mounting plate (D).
7
Caulking around the light
fixture
□
Caulk around the mounting plate (D) and
mounting surface with silicone sealant (not
included).

Operation

1
Adjusting the lamp heads
WARNING: Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION: Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
□
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
□
If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
B
D
D
A
7
Please contact 1-866-308-3976 for further assistance.
D
B
CC
HOMEDEPOT.COM