Set The Distribution Mode - Panasonic CZ-256ESMC2U Quick Reference

Set the distribution mode

Set the mode used for distributing when calculating charges.
There are two methods for distribution.
Time distribution: This method calculates distribution ratios based on the operating times of the indoor
Load distribution: This method calculates distribution ratios based on the electricity usage (including
1
Touch [System Settings] in "Settings".
The "System settings" screen is displayed.
z
1
2
Touch [Distribution mode settgs].
Enter the admin number (password level 1 or 2) and the
z
"Distribution mode settings" screen is displayed.
3
Change the settings.
24
units (thermostat ON cumulative time and thermostat OFF cumulative time).
standby power) of the indoor units and outdoor units.
2
Item
Distribution Set the distribution mode (time distribution or
modes load distribution).
Energy savng Set the range of energy savings effects for multi-
dist function air conditioners or ice thermal storage
models in calculations for distribution. (when load
distribution only)
y With "O/D system", only the air conditioning
distribution of the area of the outdoor system
is reflected.
y With "DistrGrp", the air conditioning
distribution of all areas in the entire distribution
group is reflected.
PwrDistr calc trgt Set the target of electricity distribution
calculation.
y "Operat.Time" is distributed between the
electricity for both outdoor units and indoor
units.
y "T/S ONTime" is distributed to the electricity
for only outdoor units.
4
Touch [Register].
To cancel the settings, touch [Cancel].
z
Explanation
4