Table of Contents
Advertisement
Driver Assistance Settings
Select Settings > Driver Assistance.
Driver Alerts: Allows you to enable or disable alerts for upcoming zones or road conditions
Features and Alerts, page
Speeding Alert: Alerts you when you are exceeding the speed limit.
Route Preview: Shows a preview of the major roads in your route when you start navigation.
Break Planning: Reminds you to take a break and shows upcoming services after you drive for an extended
time. You can enable or disable break reminders and upcoming service suggestions.
Proximity Alerts: Alerts you when you approach speed cameras or red light cameras.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Driver Assistance > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach proximity points.
Alerts: Sets the type of proximity points for which alerts are played.
Backup Camera Settings
The backup camera settings allow you to manage paired Garmin backup cameras and camera settings. This
menu appears on your navigation device only when the device is connected to a wireless camera receiver
cable. See the owner's manual for your backup camera for detailed information about pairing cameras and
camera settings. Go to
garmin.com/backupcamera
Select Settings > Wireless Camera, and select a paired camera.
Unpair: Removes the paired camera. You must pair the camera again before you can view it using this device
and cable.
Rename: Allows you to rename the paired camera.
Guidance Lines: Shows or hides guidance lines and allows you to adjust the position of the guidance lines.
Display Settings
Select Settings > Display.
Color Mode: Allows you to select day or night color mode. If you select the Auto option, the device
automatically switches to day or night colors based on the time of day.
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time before your device enters sleep mode while using
battery power.
Screenshot: Allows you to take a picture of the device screen. Screenshots are saved in the Screenshot folder
of the device storage.
Traffic Settings
From the main menu, select Settings > Traffic.
Traffic: Enables traffic.
Optimize Route: Enables the device to use optimized alternate routes automatically or upon request
Traffic Delays on Your Route, page
Traffic Alerts: Sets the traffic delay severity for which the device displays a traffic alert.
Settings
6).
to purchase a Garmin backup camera.
20).
(Driver Awareness
(Avoiding
43
Advertisement
Table of Contents
