Advertisement
LSC-3052-PCW
Receiving instructions:
After delivery, immediately remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a complete
description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is used is exclusively the responsibility of the owner/end-user.
2) Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or
b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential
damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining
this product.
Table of Contents
Hazard identification: explanation of signal words...................................................................................................................... 2
Product Specifications by Model........................ ........................................................................................................................... 2
Safety Guidelines........................................................................................................................................................................... 2
Components....................................................................................................................................................................................... 3
Assembly instructions....................................................................................................................................................................... 4 - 7
Limited warranty............................................................................................................................................................................... 8
Copyright 2014 Vestil Manufacturing Corp.
Rev. 7/16/2014
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com e-mail: sales@vestil.com
A
I
SSEMBLY
NSTRUCTIONS
V
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
L
ANDSCAPE
LSC-3052-PCW, MANUAL.doc
C
.
ORP
C
ART
Page 1 of 8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vestil LSC-3052-PCW
Summary of Contents for Vestil LSC-3052-PCW
-
Page 1: Table Of Contents
NSTRUCTIONS Receiving instructions: After delivery, immediately remove the packaging from the product in a manner that preserves the packaging and maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it sustained damage during transport. If damage is discovered during the inspection, immediately record a complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging. NOTES: 1) Compliance with laws, regulations, codes, and non‐voluntary standards enforced in the location where the product is used is exclusively the responsibility of the owner/end‐user. 2) Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this product. Table of Contents Hazard identification: explanation of signal words………………………………………………………………………………………………………. 2 Product Specifications by Model…………………... …………………………………………………………………………………………………………… 2 Safety Guidelines………………………………………………………………………………………………………............ 2 Components………………………………………….…………………………………………………………………………………………………………………….. 3 Assembly instructions………………………………………………………………………………………………………………………………………………….. 4 ‐ 7 Limited warranty…………………………………………………………………………………………………………………………………………………………. 8 Copyright 2014 Vestil Manufacturing Corp. Page 1 of 8... -
Page 2: Hazard Identification--Explanation Of Signal Words
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized modifications automatically void the Limited Warranty (p. 7) and might make the product unsafe to use. DO NOT attempt to carry or transport loads that exceed the capacity of the cart. Secure loads to the deck. ... -
Page 3: Components
H: M12 x 60mm J: M15 x 45mm hex bolts; M8 flat bolt (fastens washers; & M13 hex lock nuts G: M15 x 18mm handle to round head bolt coupler; M8 lock & M13 hex lock nut; M10 flat nuts washer L: Handle assembly M: Pneumatic tires Clevis pin Back N: Steering assembly 8mm flat washer Front end Hitch pin Cross bracket k arm Back end P: Rear axle weldment Q: Undercarriage frame Copyright 2014 Vestil Manufacturing Corp. Page 3 of 8... -
Page 4: Assembly Instructions
(see FIG. 2A). FIG. 2A: Wheels Valve Axle receiver Spacer stem Rear axle Outer face Inner face Copyright 2014 Vestil Manufacturing Corp. Page 4 of 8... - Page 5 round head bolts lock nut Cross brace M13 flat washer Wheel post 5. Attach the rear wheel assembly to the undercarriage frame with M10 x 18mm bolts and M10 hex lock nuts as shown above. Copyright 2014 Vestil Manufacturing Corp. Page 5 of 8...
- Page 6 7. Attach the handle to the steering assembly (refer to FIG. 5 below). a) Slide the end of the handle into the handle coupler (A) and align the bolt holes in the handle with the bolt holes in the coupler; then b) Slide the M12 x 6mm round head bolt (H) through one side of the handle bracket (also identified in FIG. 3 on p. 5), through the coupler and handle, and through the other side of the bracket; c) Secure the handle bolt with a flat washer and lock nut. FIG. 5: Attach handle to steering assembly Handle M12 x coupler (A) 60mm round Lock head bolt nut Flat washer Handle bracket Copyright 2014 Vestil Manufacturing Corp. Page 6 of 8...
- Page 7 8. Multiple carts can be hitched together by removing the formed end of the handle and connecting the handle shaft to the receiver of another cart. remove the formed end of the handle, first pull the hitch pin out of the clevis pin; then remove the washer and clevis pin. Align the pinhole in the hitch bracket of the handle with the pinhole in the receiver of the second cart; then install the clevis pin and secure it in place with the flat washer and hitch pin. (See FIG. 6 below). Clevis pin Hitch bracket Handle shaft Hitch Washer clip Washer Remove hitch pin and washer; then Clevis pin remove clevis pin Formed end Hitch of handle clip FIG. 6: Connecting two carts with handle Remove formed Pin handle shaft to the receiver of second cart end of handle Hitch receiver Handle shaft Copyright 2014 Vestil Manufacturing Corp. Page 7 of 8...
-
Page 8: Limited Warranty
(you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.
Need help?
Do you have a question about the LSC-3052-PCW and is the answer not in the manual?
Questions and answers