Installation - Eaton EX RT PDU Installation And User Manual

English
Safety guidelines: to read before installing the
product
EX RT PDU must be used indoors only.
z z
Do not place EX RT PDU near liquid or in an excessively damp
z z
environment.
Do not place EX RT PDU directly in the sun or near a heat source.
z z
Do not let liquid or foreign objects enter
z z
Ground EX RT PDU using a 2P + ground socket.
z z
The AC power socket must be connected to an appropriate electrical
z z
network protection or tap-off circuit (fuse or circuit-breaker).
Presentation of the EX RT PDU
IEC
6 1
2
16 16
16A - 250V~ 10A - 250V~
16 16
16A - 250V~ 10A - 250V~
3 5
1 Access to the pre-cabled input terminal.
2 Protection circuit breakers for the outputs.
3 Angle bracket for rack mounting.
4 Mounting kit (angle brackets, screws, washers, captive nuts).
5 2 groups of 2 x 16 A circuit breaker protected outputs.
6 2 groups of 4 x 10 A circuit breaker protected outputs.

Installation

Refer to the illustrations in this manual.
Application
EX RT PDU (distribution module) provides sockets which make the
z z
connection of your equipment to the UPS (Uninterruptible Power Supply)
easier by having one output per terminal.
EX RT PDU is fitted with circuit breakers allowing quick identification of
z z
overloaded equipment (the circuit breaker for the concerned output group
goes to the OFF position).
The IEC version of the EX RT PDU has 2 groups of 16 A output sockets
z z
and 2 groups of 10 A output sockets. Each group is protected by a circuit
breaker.
2 - 34007493XT/AD
EX RT PDU.
4