Cleaning And Maintenance - Beko HNT61630X User Manual

4

Cleaning and Maintenance

C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of Aluminium
Grease Filter
Aluminium Grease Filter is used to retain the
oil particles in the air. Aluminium Grease Filter
may change colour as it is washed; this is nor-
mal and does not require replacing your filter.
1
(Figure 4)
1- External Aluminium Grease Filter
2- Internal Aluminium Grease Filter
Pull the sliding plate out by holding the
•
front panel. Remove the external Alumin-
ium Grease Filter first, and then the internal
Aluminium Grease Filter.
Push the Aluminium Grease Filter lock for-
•
ward.
Then lower it slightly down and pull it out
•
(Figure 4). Otherwise, you can bend the
filter. Wash and rinse Aluminium Grease
Filters with liquid detergent and replace Al-
uminium Grease Filters to their sockets by
by carrying out the steps specified above in
reverse order. This filter retain the oil parti-
cles in the air.
12 / EN
C
You may wash your Aluminium
Grease Filters in the dishwasher.
CAUTION
A
In case of normal use, clean your
Aluminium Grease Filter once in a
month.
4.2 Replacement of Carbon
Filters
2
Odour removing filters contain charcoal
(Active carbon). Aluminium Grease Filters
must be installed in the product, regardless of
whether or not carbon filters are used.
(Figure 5)
Remove Aluminium Grease Filters (Figure
•
4).
To remove the charcoal filter, remove the
•
charcoal filter from its housing by rotating
it counter-clockwise from the tab (Figure 5).
Install the new charcoal filter.
•
Install the Aluminium Grease Filters.
•
A
CAUTION
Carbon filter shall never be washed.
Hood / User Manual