OPERATION
使用方法
(button lights
up)
(觸摸鍵亮起)
10
Operating at timer mode.
進行定時運轉。
Each press of the button will switch the time in the order below on the PM2.5
concentration/ timer display window. About 15 seconds after the selection is
completed, the setting will be automatically saved, and the setting is completed.
每觸摸一下,PM2.5濃度/定時顯示窗將按下圖順序進行切換。
選擇完成後約15秒,將自動保存設置,設置完成。
(PM2.5 Concentration/
Timer Display Window)
(PM2.5濃度/定時顯示窗顯示)
Notice 提示事項
The PM2.5 concentration/timer display window will automatically switch to
show the current PM2.5 concentration when the setting is completed.
設置完成後PM2.5濃度/定時顯示窗將自動跳轉顯示當前PM2.5濃度。
Timer
定時
2 hours timer
定時2小時
Stop operation automatically after 2 hours.
2小時後自動停止運轉。
4 hours timer
定時4小時
Stop operation automatically after 4 hours.
4小時後自動停止運轉。
8 hours timer
定時8小時
Stop operation automatically after 8 hours.
8小時後自動停止運轉。
12 hours timer
定時12小時
Stop operation automatically after 12 hours.
12小時後自動停止運轉。
Disable the timer
取消定時