Toto NEOREST SE Installation Manual page 4

CAUTION
!
On opening the box, check that the bathtub and parts supplied are not damaged. Do
not use any parts that are damaged.
● Replace any damaged parts.
! If installing the product in a location where damage from water leaking from the func-
tion module is anticipated, be sure to waterproof the floor.
● If there were to be a leak, it could damage the floor or floors below.
Required
Do not remove the protective sheet on the bathtub until installation is complete.
Ensure the bathtub can be used and maintained adequately.
● Consider water splashing from blocked shoulder warmers.
Check for leaks after installation is complete.
● Shut off the water supply if you discover any leaks and immediately repair them.
4