Char-Broil 10201571 Product Manual page 9

3
Put axle rod (item #4) through the holes on the right legs. Put wheels (item #5) onto the axle rod (item #4) and place the
wheel caps (item #6) over the axle rod ends.
4
Install leg braces (item #7), with support flange towards center of grill, onto the legs using eight M6 x 15mm Phillips head bolts.
Do not fully tighten screws until Step 6 is complete.
NOTE: Leg brace with two
holes for grease cup must
be mounted on right side of
grill legs.
9