Related Manuals for EINHELL RT-ID 65
Summary of Contents for EINHELL RT-ID 65
- Page 1 Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:23 Uhr Seite 1 Original operating instructions Impact Drill RT-ID I.-Nr.: 11011 Art.-Nr.: 42.597.39...
- Page 2 Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:23 Uhr Seite 2 To avoid damaging the gearbox, the drill / hammer drill selector switch should only be moved when the machine is at a standstill...
- Page 3 Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:23 Uhr Seite 3 The spindle lock is allowed to be pressed only when the equipment is at a standstill.
- Page 4 Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:24 Uhr Seite 4...
- Page 5 Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:24 Uhr Seite 5...
- Page 6 Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:24 Uhr Seite 12 “Caution - Read the operating instructions to reduce the risk of inquiry” Wear ear-muffs. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles.
- Page 7 Take all parts out of the packaging and check that The impact of noise can cause damage to hearing. they are complete. Total vibration values (vector sum of three directions) Hammer drill RT-ID 65 determined in accordance with EN 60745. Additional handle Depth stop...
-
Page 8: Before Starting The Equipment
Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:24 Uhr Seite 14 Hammer drilling in concrete (additional handle) Have the equipment checked if necessary. Switch off the equipment when not in use. Vibration emission value a = 12.345 m/s h,ID Wear gloves. K uncertainty = 1.5 m/s Drilling in metal (handle) 6. -
Page 9: Operation
Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:24 Uhr Seite 15 6.3 Fitting and adjusting the depth stop 7. Operation (Fig. 4-5/Item 2) Undo the thumb screw (a) on the additional Hold the tool by the insulated handles when handle (8) and insert the depth stop (2) in the carrying out work during which the plug-in tool hole of the additional handle. -
Page 10: Replacing The Power Cable
Article number of the equipment (such as steel), we recommend that you start the ID number of the equipment hole with a smaller drill bit. Spare part number of the required spare part For our latest prices and information please go to www.einhell.com.au... -
Page 11: Disposal And Recycling
Anleitung RT_ID_65_SPK7:_ 28.06.2010 7:24 Uhr Seite 17 9.5 Storage Store the equipment and accessories in a dark, dry and place above freeing temperature and not accessible to children. The ideal storage temperature is between 10 und 30 °C. 10. Disposal and recycling The equipment is supplied in packaging to prevent it from being damaged in transit. -
Page 12: Guarantee Certificate
Of course, we are also happy offer a chargeable repair service for any defects which are not covered by the scope of this guarantee or for units which are no longer covered. To take advantage of this service, please send the device to our service address. EINHELL AUSTRALIA PTY LTD 6/166 Wellington Street Collingwood VIC 3066...
Need help?
Do you have a question about the RT-ID 65 and is the answer not in the manual?
Questions and answers