Page 1
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:20 Uhr Seite 1 Original operating instructions Impact Drill RT-ID 105 Art.-Nr.: 42.597.79 I.-Nr.: 11012...
Page 2
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:20 Uhr Seite 2 To avoid damaging the gearbox, the drill / hammer drill selector switch should only be moved when the machine is at a standstill Change the gear only when the drill is at a standstill. If you fail to observe this point, the gearing may be damaged.
Page 3
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 3...
Page 4
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 4...
Page 5
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 5...
Page 6
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 6 “Caution - Read the operating instructions to reduce the risk of inquiry” Wear ear-muffs. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles.
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 7 applications. Our warranty will be voided if the Important! machine is used in commercial, trade or industrial When using equipment, a few safety precautions businesses or for equivalent purposes. must be observed to avoid injuries and damage. Please read the complete operating manual with due care.
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 8 Now drill the hole until the depth stop touches the Important! workpiece. The vibration value changes according to the area of application of the electric tool and may exceed the 5.3 Fitting the drill bit (Fig. 6-7) specified value in exceptional circumstances.
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 9 Tip: Start drilling holes at low speed. Then increase Important. Do not attempt to make this setting whilst the speed in stages. the drill is in use. Benefits: 6.7 Tips for working with your hammer drill The drill bit is easier to control when starting the hole and will not slide away.
Page 10
Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www.einhell.com.au 9. Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system.
Page 11
Anleitung_RT_ID_105_SPK7:_ 21.01.2010 11:21 Uhr Seite 11...
The Einhell Express Guarantee is valid for a period of 2 years starting from the purchase date of the product. Claims made under the Einhell Express Guarantee should be submitted before the end of this guarantee period and within two weeks of the defect being noticed.