Table of Contents
Advertisement
>3.5m
For units with foam rollers, squeeze the foam to allow the roller
to get soaked.
POWER CABLE
•
To minimize cord twisting, completely unroll and straighten
the cable before putting the cleaner the pool.
CLEANER LOCATION
•
It is ideal to have the control unit positioned near the
midpoint of your pool (lengthwise).
•
Depending on the size and shape of your pool, the entire
length of the floating cable may not be necessary. The
floating cable should reach from the cleaner control unit to
the furthest point in the pool, plus the depth at the deep
end of the pool. To reduce cable tangling, any excess cable
should be coiled and placed next to the control unit.
Submerge the cleaner in the pool by gently rocking it back,
forth and sideways to help the cleaner purge trapped air and
sink to the pool bottom.
Advertisement
Table of Contents
