Table of Contents
Advertisement
Figure 3
16.1.1.3
To Remove Discharge Grille
8 Pull out the main
electronic controller
halfway.
5 Detach the Earth wire
screw.
7 Remove screw to remove
terminal board complete.
6 Detach the CN-DISP
connector then remove
the indicator complete.
12 Then pull the discharge grille
downward gently to dismantle it.
9 Detach connectors as labeled from the
10 Detach AC303 (WHT) connector from
Discharge Grille
11 Pull out to remove the drain
hose from the discharge grille
Figure 5
64
electronic controller. Then pull out main
controller gently.
PCB, then detach the RY-PWR (Black
and Brown) from terminal board.
Figure 4
AC303
RY-PWR
CN-PCFM
CN-FB
CN-STM3
CN-STM1
CN-TH
Advertisement
Table of Contents
