Table of Contents
Advertisement
User Guide
Rev 5.0 Apr.20
NMEA log file for the step reference. The program will also load every NMEA
sentence and display all information to the corresponding windows.
RTCM
Note: This feature is only available on the XA11xx and XM11xx.
The ntrip client function can connect to the specified ntrip caster and stream
RTCM. Before connecting to an ntrip caster, please set up the required
parameters properly.
Click the down arrow next to the RTCM button and click Settings.
Figure 2-5: RTCM Settings
The Ntrip Client Settings dialog is then displayed, as shown in
Figure 2-6: Ntrip Client Settings
Ntrip Stream: if the computer has a connection to the Internet, the program
•
will download the source table automatically. You can also get the source
table manually by clicking the Get Source Table button. You must then
choose a proper stream which meets your RTCM version.
Ntrip Caster: specifies the address and port number of the specified caster
•
with the authorized username and password to log in.
Location: designates fixed location (latitude and longitude), or a dynamic
•
location which reads from the GPS location. Such location information will
send an ntrip caster to acquire more accurate RTCM-correct data.
10
Figure
2-5:
41111068
Advertisement
Table of Contents
