Advertisement
1234 V1 B HIGH TEMP
Add text in HIGH
interval
1234 G1
Activate output on
alarm
1234 GA
Output follows
state on input
1234 G0
Deactivate output
in case of alarm
1234 M0 TEMP <V1 R>
Add macro 0 for
return of
temperature
Call the unit. Press 1234 (password) when the connection has been established and await two 'beeps'. Enter
the desired code and hang up.
Examples of codes:
*0x (asterisk + zero + zero)
*1x(asterisk + 1 + zero)
*2x (asterisk + 2 + zero)
x
If # is pressed while receiving voice message, the subsequent persons in the call list will not
receive an alarm.
Pg.
4
SET-UP - MANAGEMENT
Additional help: see the manual on www.profort.com
Control with call from telephone
Alarm text in HIGH interval (higher than 30
degrees C.)
(G1 = 10 secs., G2 = 20 secs., G3 = 30 secs., G4 =
1 min, G5 = 2 mins, G6 = 4 mins, G7 = 8 mins, G8
= 16 mins og G9 = constant.)
Sets the relay output to activate in case of alarm on
an input. Output is determined by zone.
Indicates that the output follows the corresponding
input if text is added.
Notice: input signal has higher priority than
command S0 (S + zero) and B0 (B + zero)
Output is not activated in case of alarm (G+null)
The unit returns value on analogue 1 (e.g.
temperature) when a text message with the word
'TEXT' is sent ('1234' omitted in macros). If
using the Profort app, the macro names are shown
as buttons in the app.
Pulses output x for 10 secs.
Breaks output x
Closes output x
Performs macro x
.
Version 1.2
Advertisement
