Advertisement
5. Using the hex wrench of your choice (R or U), attach the Top Rail (K) to the leg assemblies with two
8x60mm Hex Bolts. See Figure 5.
N
H
Fig. 6
6. Using the predrilled holes as guides, align the Angle Bracket (L) flush against the left leg assembly
and tight against the top rail. Using the hex wrench of your choice (R or U), attach with six 6x30mm
Hex Screws (P). See Figures 6 and 6b. Align the end of the Corner Brace (F) that has the pocket
drilled hole to the predrilled hole in the top rail. Using the hex wrench of your choice (R or U), attach
with one 8x60mm Hex Bolt (N). Attach the brace to the Short Side Stretcher (H) with one 8x60mm
Hex Bolt (N). Be sure to tighten the bolt so the head is counter-sunk into the stretcher. See Figure 6a.
Repeat for the Right Leg assembly.
N
K
L
Fig. 6a
P
N
N
P
N
P
N
N
Fig. 5
Fig. 6b
L
N
N
P
Page 5 – 4302KFBA – 01/10
x 2
x 2
x 4
x 12
Advertisement
