Toshiba SHRM R410A Quick Reference page 58

57
Monitor Function of Remote Controller Switch
When using a remote controller with the model name RBC-AMT32E,
the following monitor functions can be used.
Calling of display screen
<Content>
The sensor temperature or operation status of the remote controller, indoor unit, or the outdoor unit can be
known by calling up the service monitor mode from the remote controller.
[Procedure]
1
TEST CL
Push + buttons simultaneously for 4 seconds or more to call up the service monitor mode.
The service monitor goes on, and temperature of the CODE No.
2
Push the temperature setup
For displayed codes, refer to the table next page.
3
SET
Push button to determine the item to be monitored.
Then monitor the sensor temperature or operation status of indoor unit and the outdoor unit in the
corresponding refrigerant line.
4
TEST
Pushing button returns the display to the normal display.
TEMP
buttons to select the CODE No. to be monitored.
TEMP.
2
TIMER SET
TIME
FILTER
RESET TEST SET CL
4 3
00
is firstly displayed.
ON / OFF
FAN MODE
SAVE VENT
SWING/FIX UNIT LOUVER
1